Imọ paramita | Ẹyọ | ZHV120TR2 | ||||||
A | B | C | ||||||
Abẹrẹ Ẹyọ | Dabaru Opin | mm | 36 | 40 | 45 | |||
O tumq si abẹrẹ iwọn didun | cm3 | 162 | 201 | 254 | ||||
Ìwúwo abẹrẹ (PS) | g(oz) | 151 (5.3) | 187(6.6) | 236(8.3) | ||||
Max.Abẹrẹ Ipa | MPa (kgf/cm2) | 222(2268) | Ọdun 180 (1838) | Ọdun 142 (1452) | ||||
Oṣuwọn abẹrẹ | cm3/s | 114 | 140 | 178 | ||||
Iyara abẹrẹ | mm/s | 112(172) | ||||||
Dabaru Yiyi Iyara | rpm | 0-300 | ||||||
Iwọn Of Mold Awo Pẹlu protruding Nozzle | mm | ≥45 | ||||||
Dimole Ẹyọ
| Ipa agbara | KN(tf) | 1176(120) | |||||
Clamping Ọgbẹ | mm | 280 | ||||||
Min.Mold Sisanra | mm | 280(380) | ||||||
Max.Opening Stroke | mm | 560(660) | ||||||
Ijinna Laarin Awọn Pẹpẹ Tie(L*W) | mm | --- | ||||||
(L*W) O pọju.Iwon Mold | mm | 400*400 | ||||||
(L*W)Iwon Awo/ Ifaworanhan | mm | ∅ 1170 | ||||||
Awọn ọja Ejector Distance | mm | 110 | ||||||
Ejector Force | KN(tf) | 45(4.6) | ||||||
Awọn miiran | System Ipa | MPa (kgf/cm2) | 13.7 (140) | |||||
Epo Ojò Agbara | L | 410 | ||||||
Agbara itanna | KW(HP) | 18.5 (25) | ||||||
Agbara igbona | KW | 10.7 | ||||||
Awọn iwọn ẹrọ | L*W | mm | 2470*1950 | |||||
H | mm | 3200(4040) | ||||||
Iwọn Ẹrọ | T | 6.4 |
(1) Ẹsẹ kekere: Ẹsẹ kekere, o dara fun lilo ni aaye to lopin ti ile-iṣẹ naa.
(2) Ṣiṣe abẹrẹ giga: idọgba abẹrẹ ati awọn ilana itutu agbaiye ni a ṣe ni akoko kanna, ni imunadoko ni kikuru iyipo abẹrẹ abẹrẹ.
(3) Didara ọja iduroṣinṣin: Lakoko ilana abẹrẹ, agbara walẹ jẹ itọsi si yiyọ kuro ti awọn nyoju ati dinku awọn abawọn ọja ti o fa nipasẹ awọn nyoju.